Short: Train control via JMRI or DCC-EX (beta) Author: hakke@gmx.de (Andreas Winkler) Uploader: hakke gmx de (Andreas Winkler) Type: misc/misc Version: 0.9 Requires: MUI 3.x; TCP/IP stack or MAX3232 serial cable Architecture: m68k-amigaos >= 3.0 Distribution: Aminet JMRI Controller turns your Amiga into a throttle and decoder programmer for a DCC model railroad. It talks to JMRI (www.jmri.org) on another computer, through JMRI's Web Server (WebSocket, port 12080) or its JSON Server (port 2056). It can also drive a DCC-EX command station (an Arduino with a motor shield, dcc-ex.com) directly, without JMRI and without a PC: on the Amiga's serial port or over WiFi/Ethernet. This is a beta version. It was not yet tested on many real Amigas and layouts; DCC-EX on the serial port in particular needs reports from real hardware. Please send problem reports, with the messages from the Log page, to the address above. Features -------- - Roster: all locomotives with every detail JMRI keeps - road, model, decoder, owner, groups, operating duration, last operated, function names, comment, custom attributes - and the locomotive's photo and icon. Roster group filter, selectable and sortable columns as in JMRI, double-click a photo for a large picture window. - Up to 12 locomotives at once. A banner shows the loco's photo with its name and address; speed slider in percent of the loco's maximum speed, step buttons, direction, emergency stop. - Functions F0-F28 named as in the roster; momentary functions (horn) only stay on while held. Bubble help shows the full names. - STOP ALL and track power in the status bar. - Turnouts, routes, sensors and lights with live states; fast clock. - Decoder programming on the programming track or on the main (POM): any CV with bit editor, motor CVs, CV29, short/long address, speed table (CV67-94) with curves, CV lists with load/save, decoder identification (NMRA manufacturer list) and factory reset. All through a queue with timeouts. - Photos are decoded with your datatypes, or with the built-in JPEG/PNG/GIF/BMP decoder when there is none; dithered to the screen. - Event and protocol log; settings saved in the program's drawer. - Keyboard shortcuts for driving, Right Amiga 1-6 for the pages, HELP for the AmigaGuide manual. - Runs on any 68000 with Kickstart 3.0 and MUI 3.1; no FPU needed. The window fits a 640x256 screen. Requirements ------------ - AmigaOS 3.0+, MUI 3.1+ (or Zune on AROS) - JMRI 4.x/5.x and a TCP/IP stack (Roadshow, AmiTCP, Miami, Genesis), - or a DCC-EX command station on the serial port (MAX3232 level shifter between Amiga and Arduino) or over TCP. Installation and use -------------------- Unpack anywhere and double-click JMRIController. Enter the host name or IP address of the JMRI computer, choose the connection type and press Connect. The AmigaGuide manual (JMRIController.guide, also on the HELP key) explains every page, the DCC-EX serial cable, the tool types and the Shell arguments: JMRIController [HOST ] [PORT ] [RAW|WEBSOCKET|DCCEX|SERIAL] [DEVICE ] [UNIT ] [BAUD ] [CONNECT] [LOCO
] [PAGE ] [NOPICTURES] [NODATATYPES] Credits ------- The built-in picture decoder is stb_image by Sean Barrett (public domain). MUI is by Stefan Stuntz. JMRI and DCC-EX are projects of their own; JMRI Controller is not affiliated with them. Author: Andreas Winkler - www.taiwanrider.com (HAKKE Online Shop, Amiga and synthesizer related hardware and software). Freeware -------- You may copy and pass on JMRI Controller freely, also on CD-ROMs and other collections, as long as the archive stays complete and unchanged. This program is freeware. If you enjoy using it and would like to buy me a cup of coffee, small tips are very welcome via PayPal, to the same email address above - but they are never expected, and nothing in the program is held back for anyone who does not. Disclaimer ---------- JMRI Controller is provided "as is", without warranty of any kind. You use it at your own risk: the author takes no responsibility for any loss of data or for any damage to software or hardware, whatever the cause. History ------- 0.9 First public release (beta).