Data Pack V 2.01
                            ================


Introduction:
    This small Proggie was developed for all the dudes out there who wanna
    use the advantages of the PowerPacker, without the need of buying a
    new Version or with dealing with a pirate-copy.

Installation:
    Copy the powerpacker.library in your LIBS: Directory. Then copy either
    the reqtools13.library or the reqtools20.library to your LIBS:
    directory depending on your Kickstart-Release. The name must be in
    every case "reqtools.library"!!!!!  Use reqtools13.library also if
    you have Kickstart 1.2. If you use the 1.3-library with Kick 2.0, it
    doesn't do anything except a small decrease in speed and a little more
    memory-usage. In the other way (2.0-lib with Kick 1.3 or smaller) your
    Machine will crash or it won't work (both things may happen - I
    checked this one out).

Usage:
    Data Pack can handle all Data-Packed files from PowerPacker Versions
    up to V4.1.  You can decrunch them or even crunch them with the new
    V 4 high-Speed Routines. The Program needs the powerpacker.library
    for (de)crunch-Routines and the reqtools.library for the Requesters.

The Menus:
    DataPack is totally menu-controlled. It runs under Workbench 1.2, 1.3
    and 2.04.
    Project:
    --------
    Load: Load a file.
          If the file is already crunched, it will be automatically de-
          crunched at loading time. If you have specified a crunchmode
          in the second menu, then the crunch-Process will start auto-
          matically. You can notice this 'cos the DP-Screen gets the
          Workbench 1.3 colors.
 Save As: Saves the crunched or decrunched file under the name you
          specified in the file-requester.
   About: What could this be, eh?
    Quit: Well, the most complex part :-)

    Crunchmode:
    -----------
    Here you can select the crunchmode of the Data. Choose decrunch only if
    you just wanna decrunch files.

    Prefs:
    ------------
    Colors:    Helps you selecting you favourite colors for the DataPack
               Screen.
Save Settings: Saves the Selected colors to the file "s:DataPack.config".

Disclaimer: This Program is distributed "as is". No Warranty, express or
            implied can be taken for the 100% functionality, although
            it is tested very hard. No responsibility for any damage on
            Data, Hardware or Software can be claimed to the developer
            of this Program.

Distribution: This Program is Freeware. It may freely be distributed as long
              as:
              1) All the Files in this directory remain unmodified and are
                 distributed completely. This limitation does not affect
                 the distribution in LHARCED or ZOO'ed form via BBS.
              2) If the Prog is distributed by a dealer, the cost for a
                 disk including this Prog may not exceed the copy-fee for
                 an original AmigaLibDisk by FF!

Copyright notice:
    This Program and its Sourcecode are (c) 1992 by Roland Steinbach and
    Protectors Software Design(PSD).

For error-reports or suggestions write to:

            Roland Steinbach/PSD
            Am Schlagteil 8
            8401 Pentling/Großberg
            GERMANY

Developmental notes:

The Software used to code this one is:
    DICE C Compiler V 2.06.35 (this is my first project using DICE and it
                              is the coolest compiler I ever got!)
    PowerSource V 3.0
    DCC-Deluxe DICE Frontend V 1.13
    AZ V 1.50 Mutitasking Editor

The Program uses the following freely distributable Libraries:

reqtools.library by Niço Francois
powerpacker.library by Niço Francois
Thanx for this great stuff!

Hope you like this one 'cos I do

Regards

Version History:
    V 1.0: first release
    V 2.0: Some Code-changes:
           - now reqtools.library filerequester instead of arp.library
           - Own Screen for Program
           - Some length and speed optimization
           - Now Color-select and Settings-saving.
           - full Workbench support (V1.0 required IconX or sth.like that)
    V2.01: Bug fix:
           - now correct handling if file Loaded or saved from/to
             Root-Directory of a Disk
           - Testing with Kickstart 2.04 worked fine!
    V 2.2: - Added Crunch-Indication (only at the End 'cos of Performance)
           - Minor Changes

PERMISSION  UID  GID    PACKED    SIZE  RATIO METHOD CRC     STAMP     NAME
---------- ----------- ------- ------- ------ ---------- ------------ ----------
[unknown]                 6375   13196  48.3% -lh5- b3f4 Sep  9 14:38 DataPack
[unknown]                 2025    4462  45.4% -lh5- 507d Sep  9 14:39 DataPack.doc
---------- ----------- ------- ------- ------ ---------- ------------ ----------
 Total         2 files    8400   17658  47.6%            Sep  9 21:59