This was made for testing out issues when running Apollo 1260 @ 100 MHz, 
but can be used with any accelerator with fastmem. If you can run your 
turbo card with no fastmem but it fails when you put in fastmem, you 
can rule out all chips until only the CPU is left, without opening 
your Amiga. One test, fast-f2f, is the stress test for heavy bus use. 
Run it until it stops flashing, 30 minutes should mean you have a 
stable CPU + memory chain and the problem with freezing is due to 
other heavy use, sometimes heavy (overclocked!) FPU use causes CPU 
shutdown due to overheating, for example.

No other component like HDD interface, Indivision, wrong 
Workbench setup etc is involved, because the system is off during 
testing. You can run this from a clean boot CLI with no other command 
than your CPU setup command, if necessary.

Archive:  /home/aminet/aminet_root/doc//util/moni/ApolloBusTest.zip
 Length   Method    Size  Ratio   Date   Time   CRC-32    Name
--------  ------  ------- -----   ----   ----   ------    ----
       0  Stored        0   0%  12-05-11 19:29  00000000  ApolloBusTest/
   26532  Defl:N      365  99%  11-26-11 21:00  5e2b52a3  ApolloBusTest/chip-c2c
   26532  Defl:N      366  99%  11-26-11 21:00  6c3f94f1  ApolloBusTest/chip-c2f
   26532  Defl:N      365  99%  11-26-11 21:00  4c74f9ad  ApolloBusTest/chip-f2c
   26532  Defl:N      366  99%  11-26-11 21:00  7e603fff  ApolloBusTest/chip-f2f
   26532  Defl:N      365  99%  11-26-11 21:00  a543a7c2  ApolloBusTest/fast-c2c
   26532  Defl:N      366  99%  11-26-11 21:00  97576190  ApolloBusTest/fast-c2f
   26532  Defl:N      366  99%  11-26-11 21:00  b71c0ccc  ApolloBusTest/fast-f2c
   26532  Defl:N      366  99%  11-26-11 21:00  8508ca9e  ApolloBusTest/fast-f2f
    2948  Defl:N     1392  53%  12-05-11 19:28  ff5fd818  ApolloBusTest/readme-long
--------          -------  ---                            -------
  215204             4317  98%                            10 files