Usage: GT2STEREO [songname] [options]
Options:
-Axx Set ADSR parameter for hardrestart in hex. DEFAULT=0F00
-Bxx Set sound buffer length in milliseconds DEFAULT=100
-Cxx Use CatWeasel MK3 PCI SID (0 = off, 1 = on)
-Dxx Pattern row display (0 = decimal, 1 = hex, 2 = decimal w/dots, 3 = hex w/dots)
-Exx Set emulated SID model (0 = 6581 1 = 8580) DEFAULT=6581
-Fxx Set custom SID clock cycles per second (0 = use PAL/NTSC default)
-Gxx Set pitch of A-4 in Hz (0 = use default frequencytable, close to 440Hz)
-Hxx Use HardSID (0 = off, 1 = HardSID ID0 2 = HardSID ID1 etc.)
Use high nybble (it's hexadecimal) to specify right HardSID ID
-Ixx Set reSID interpolation (0 = off, 1 = on, 2 = distortion, 3 = distortion & on) DEFAULT=off
-Jxx Set special note names (2 chars for every note in an octave/cycle, e.g. C-DbD-EbE-F-GbG-AbA-BbB-)
-Kxx Note-entry mode (0 = PROTRACKER 1 = DMC) DEFAULT=PROTRK.
-Lxx SID memory locations in hex. DEFAULT=D500D400
-Mxx Set sound mixing rate DEFAULT=44100
-Oxx Set pulseoptimization/skipping (0 = off, 1 = on) DEFAULT=on
-Qxx Set equal divisions per octave (12 = default, 8.2019143 = Bohlen-Pierce)
-Rxx Set realtime-effect optimization/skipping (0 = off, 1 = on) DEFAULT=on
-Sxx Set speed multiplier (0 for 25Hz, 1 for 1x, 2 for 2x etc.)
-Txx Set HardSID interactive mode sound buffer length in milliseconds DEFAULT=20, max.buffering=0
-Uxx Set HardSID playback mode sound buffer length in milliseconds DEFAULT=400, max.buffering=0
-Vxx Set finevibrato conversion (0 = off, 1 = on) DEFAULT=on
-Xxx Set window type (0 = window, 1 = fullscreen) DEFAULT=window
-Yxx Path to a Scala tuning file .scl
-Zxx Set random reSID write delay in cycles (0 = off) DEFAULT=off
-wxx Set window scale factor (1 = no scaling, 2 to 4 = 2 to 4 times bigger window) DEFAULT=1
-N Use NTSC timing
-P Use PAL timing (DEFAULT)
-W Write sound output to a file SIDAUDIO.RAW
-? Show this info again
-?? Standalone online help window
COMPILE
gt2stereo/src> make -C bme CC=gcc
gt2stereo/src> make -f makefile.mos CC=gcc
CREDITS
"Buggy Boy"
|